Ivoclar Programat P90 Manual ^hot^ Site

| Error Code | Meaning (per manual) | Solution | | :--- | :--- | :--- | | | Thermocouple short circuit or broken wire. | Replace thermocouple (Part # 582926AN). Check wiring harness. | | E3 | Vacuum not reaching required level (-0.95 bar). | Check hose connections, oil level, and vacuum pump diaphragm. | | E5 | Temperature deviation exceeds ±10°C for more than 2 minutes. | Run calibration program. If persistent, replace heating elements. | | Door Error | Safety interlock failure. | Clean door seal. Adjust door latch tension per manual diagram. |

This guide is a summary only. Always refer to the official Ivoclar Programat P90 User Manual for complete safety and operational instructions. Ivoclar Programat P90 Manual

: A built-in buzzer signals when it is time to close the furnace door or insert/remove objects from the firing tray. Important Safety Warnings | Error Code | Meaning (per manual) |