| Reference | Value | Notes | |-----------|-------|-------| | U1 | NE555 | Timer IC | | U2 | LM393 | Dual comparator (one used) | | D1, D2 | 1N4148 | Fast switching diodes | | D3 | Red LED | Fault indicator | | D4 | Green LED | Pass indicator | | C1 | 100nF | Ceramic disc | | C2 | 10nF | Polyester | | C3 | 100µF / 16V | Electrolytic | | C4 | 10pF | Ceramic (critical) | | R1 | 10kΩ | 1/4W | | R2 | 1kΩ | 1/4W | | R3 | 100Ω | 1/4W | | R4 | 1MΩ | 1/4W | | R5 | 47kΩ | 1/4W | | R6 | 10kΩ | 1/4W | | R7 | 330Ω | 1/4W | | R8 | 220Ω | 1/4W | | RV1 | 10kΩ trimpot | Calibration | | Lx | Coil under test | External connection | | Power | 9V battery (or 9-12V DC) | Regulated recommended |
: The tester uses 8 LEDs to indicate the Q-factor. Green : High Q (Good). Yellow : Medium/Marginal Q. Red : Low Q (Bad). No Lights : Absolute short circuit. blue ring tester schematic diagram exclusive