Xycd60 Manual Exclusive Site

Short-press to cycle through parameters: UP (Upper limit), dn (Lower limit), OP (Conduction time), dOP (Delay start time). Use UP/DOWN buttons to adjust values. Long-press SET (approx. 5s) to save. 2. Key Specifications Voltage Range : 6V to 60V DC. Control Precision : 0.1V.

for about 3 seconds to enter the parameter setting interface. Short press SET to cycle through the parameters: UP : Upper limit voltage. dn : Lower limit voltage. OP : Conduction time (00:00 to 99:59, or "----" to disable). dOP : Delayed conduction time (0–999 seconds). FOP : Forced start time (0–10 seconds) in discharge mode. Use UP/DOWN buttons to adjust the values. Press and hold SET again to save and exit. Voltage Percentage Calculation xycd60 manual