Strip wires to approximately 7mm. Insert them into the terminal block and tighten the screws. Ensure there are no stray strands that could cause a short circuit.
One for controlling door relays or strikes. ts1162 installation manual
| Problem | Likely Cause | Solution | |---------|--------------|----------| | Printer not detected | USB cable loose or wrong port | Try a different USB port or cable. Ensure cable is data-capable. | | Wi-Fi connection fails | Wrong password or router channel | Re-enter password. Change router to 2.4 GHz band. | | Ink error after install | Orange cap still on cartridge | Remove the orange cap. Clean electrical contacts. | | Paper jam | Paper too thick or curled | Use standard 80 gsm paper. Fan the stack before loading. | | Driver install freezes | Antivirus blocking | Temporarily disable antivirus. Run installer as administrator. | Strip wires to approximately 7mm