Firmware Reset Samsung Ml 2160 2165 2160w 2165w Link -

Once you have obtained the specific firmware file ( .hd or .fls ) and a "USBPRNS2.exe" uploader tool: Turn the printer off.

If the "reset" is intended to allow refilled cartridges without new chips, you must use a "Fix Firmware" specifically generated for your SN and CRUM. Official Firmware firmware reset samsung ml 2160 2165 2160w 2165w link

Turn on the device and hold the Stop/Cancel button for 10–15 seconds until the LEDs flash, then restart. Once you have obtained the specific firmware file (

If a newer firmware blocks third-party toner, you must downgrade: If a newer firmware blocks third-party toner, you

Note: Always verify that the firmware version is newer than your current version; downgrading is rarely supported.

The 15-character ID found on the back of the printer.

For wireless models (2160W/2165W), an additional step may be required to clear network settings: after the above reset, press and hold the ‘WPS’ button for 15-20 seconds until the wireless LED flashes rapidly, then release.