Media Converter In Cisco Packet Tracer Link [verified] Site

Drag the following onto the workspace:

Connect the copper port of Media Converter #2 to your final end device or remote switch using a copper cable. 4. Verify Connectivity Wait for the link lights to turn from amber to green. Command Prompt on a connected PC and attempt to media converter in cisco packet tracer link

Because the media converter is Layer 1, you ignore it for IP/Trunking configuration. You configure the switches as if they were directly connected via a long cable. Drag the following onto the workspace: Connect the

Connect the devices as follows:

Configuring the Media Converter in Packet Tracer is a "plug-and-play" process, as the device operates largely at the Physical Layer (Layer 1) of the OSI model. It does not have an IP address or a CLI for configuration like a router or switch. Command Prompt on a connected PC and attempt